Gearboxes

Motovario S.P.A

ERS group has been a major sales partner for Motovario in Ireland.

Our company sells, distribute, repair and service all of the Motovario Gear Boxes in our Limerick, Waterford & Galway centres.

 

Motovario S.P.A. is a manufacturing company of power transmission components for civil and industrial applications. They are seen as one of the market leaders of gearboxes.

We provide different Motovario gear products, but the three that extinguish themselves are:

Motovario - Helical Gear Reducers - ERS - Sales Gear Boxes
HELICAL GEAR REDUCERS

Sizes: 030-040-050-060-080-100-125-140

Available versions: H - fitted for motor coupling, IH - with input shaft, CH - with the compact motor, PH - fitted for motor coupling with flexible joint

Casing with feet, flange F or universal U

Power up to 45 kW

Gears hardened and tempered with shaved or ground profile

Gearing with 1, 2 and 3 reduction stages

Reduction ratios between 1,23 and 282,10

Torque max 8.000 Nm and admissible radial loads max 55.000 N

Cases in G200 grey cast iron for high strength and optimized with FEM analysis

Load capacity calculated to ISO 6336 and verified according to AGMA 2001

Painted with RAL 5010 blue epoxy-polyester powder

Accessories: output flange, backstop device, viton oil seals

Motovario - Worm Geared Motors - ERS - Sales Gear Boxes
WORM GEARED MOTORS

NMRV – Sizes: 025-030-040-050-130-150

NMRVpower – Sizes: 063-075-090-110

Available versions: fitted for motor coupling, with input shaft, with torque limiter

Power up to 18,5 kW

Cases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast iron

Ratios between 5 and 100

Max torque 1.550 Nm and admissible radial loads max 18.000 N

Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity

Worm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)

Ground worm profile ZI (UNI4760)

Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281

Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder

Available with the pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P Series

Worm gear reducers are available with different combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpower

Options: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

Motovario - Helical Bevel Gear Reducers - ERS - Sales Gear Boxes
HELICAL BEVEL GEAR REDUCERS

Sizes: 060-080-100-125-140-150-160

Available versions: B - fitted for motor coupling, IB - with input shaft, CB - with a compact motor, PB - fitted for motor coupling with flexible joint

Casing with feet FC, flange SC and universal UC

Power up to 90 kW

Gears hardened and tempered with shaved or ground profile

Gearing with 3 reduction stages

Gleason spiral bevel gear pairs with run-in profile mounted as second reduction stage for a higher resistance

Reduction ratios between 5,71 and 187,24

Torque max 13.000 Nm and admissible radial loads max 80.000 N

High-strength casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to ensure top-level performances and high reliability

Load capacity calculated and verified according to ISO 6336 and AGMA 2001

Painted with RAL 5010 blue epoxy-polyester powder

Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, protection cover kit, viton oil seals, reinforced output, assembly/disassembly kit

Created to perfection by Digital Locker

Show Buttons
Hide Buttons